A colour metric system is how the Heavy Metal Test Kits work. When activating a test the colour will start at green (no ionic metals). When a heavy metal is introduced that green colour will react. Take copper for example; the green colour will quickly change to brown indicating a copper toxicity. Now say that there are two heavy metals in the sample like copper and lead. Because in suspension copper is lighter then lead the copper will be sitting on top. So the result would be two bands of colour a brown band on top of an orange/red band. This is how you can determine what heavy metals are in your system and where they might be coming from. Also, when on the Multi Metal D-tox you will see a toxic colour like brown (copper) slowly turn back to the initial colour green as you detoxify.

Verifying the Heavy Metal Test Kit Efficiancy

1. Take a fresh coated test tube, remove the cap and add approximately 0.5 ml (12 drops) of Solvent to the test tube.

2. Replace the cap and shake the test tube vigorously for about 30 seconds to effect dissolution of Dithizone in the solvent. Invert the test tube and let it stand using the cap as the base for another 30 seconds. The solution should now be green and fresh and ready for use.

3. Remove the test tube cap and add 2-3mL of distilled or deionised water sample and add it to the test tube. Replace the test tube cap.

4. Shake vigorously for about 5 seconds, and then invert the test tube using the cap as the base and let it stand so that the solution can be allowed to separate.

5. Read the top layer and compare it with the chart provided with the stand. It should read Green indicating no ionic Heavy Metals.

6. Now place a piece of copper wire (with insulation removed) in the test tube and shake vigorously for about 5-10 seconds.

7. The test will now show the presence of copper. This also indicates the aggressive nature of water in leaching metals.

Testing Mediums

Urine, Saliva, Perspiration and even a blood sample may be tested for Heavy Metal using the same procedure.The Heavy Metal Test Kit can also be used to determine the environmental sources of the contamination in aqueous solutions such as tap water. Since all Heavy Metal ions are water soluble, solids like food items, porcelain dishes, dust samples from carpets, wall paints and wall paper etc. can be tested for Heavy Metals after soaking them in distilled water. In addition to being an initial analytical screening tool for Urine, Saliva, Perspiration and Blood the test is also useful for finding the causes of contamination in the patient's environment.

Diphenylthiocarbazone (Dithizone)

In 1925 Helmut Fischer of the Siemens Concern in Berlin succeeded in detecting heavy metal ions by means of a dithizone process. As a reagent, dithizone is able to indicate the presence of heavy metal ions in qualitative and quantitative terms. Dithizone, in binding the metals (binds to Cu, Zn, Cd, Hg, Pb, Mn, Co, Ni,), form coloured complexes in the interior of the molecule which are soluble in nonpolar organic solvents. The coloration of these solutions is very intense, its particular coloration determined by the atomic radius of the respective metal present in the complex. The reaction times of the heavy metal ions vary; therefore, depending on their respective concentrations, different colorations may occur from which one can, in addition to the qualitative conclusions also semi quantitative ones regarding the contaminant. (At the lower ppm level, even at the ppb level).

Usage Protocol:

Multi Metal D-Tox should be used in conjunction with the Heavy Metal Test Kit also developed by Fulhealth Industries P/Ltd. After a client has taken a Heavy Metal Test and his urine sample is positive for ionic heavy metals, initially prescribe 2 mL per day of Multi Metal D-Tox (preferably mixed in 1 litre of drinking water, consumed over the day). Approximately 2 weeks after commencing on the Multi Metal D-Tox (chelate) a retest using the Heavy Metal Test Kit should be conducted.

On re-testing, if (a) the Heavy Metal Test Kit shows green, the client should continue to take the Multi Metal D-Tox at 2 mL, 3–4 times per week until the bottle is consumed, allowing heavy metals stored in soft tissue to be released by chelation. Refer FAQ 16 and Free Radicals, para 5; (b) If the test still shows signs of ionic heavy metals, continue with Multi Metal D-Tox daily until colour shows green.

N.B. it is also recommended that the client should endeavour to find the source of the contaminate.

It is also recommended that testing should be carried out half yearly once the Heavy Metal Test Kit shows green (i.e. no ionic metals).

Proving that the Multi Metal D-Tox really works:

We know that a change in colour of the green test solution indicates the presence of ionic metals. Any product that is able to 'chelate' (neutralise) ionic metals must be able to maintain a green colour once the chelate is added to the sample containing the contaminate.

Run the following test to verify the effectiveness of Multi Metal D-Tox:-

1. Collect a sample that showed a change in the colour of the Heavy Metal Test Kit indicating the presence of ionic metals.

2. Using the same sample, reduce the sample to just a quarter of sample cup.

3. Add 5 drops of Multi Metal D-Tox to the sample cup.

4. Take an unused coated test tube, remove the cap, and using a dedicated pipette, add approximately 0.5 ml (~ 12 drops) of Solvent to the test tube.

5. Replace the cap and shake the test tube vigorously for about 30 seconds to effect dissolution of Dithizone in the solvent. Invert the test tube and let it stand using the cap as the base for another 30 seconds. The solution should now be green and fresh and ready for use.

6. Remove the test tube cap, pick up approximately 2-3mL of testing sample from the sample cup using a clean pipette and add it to the test tube. Replace the test tube cap.

7. Shake vigorously for about 5 seconds, then let the test tube stand using the cap as the base, so that the solution is allowed to separate.

8. Read the top layer and you will see that the solution remains green indicating the effective working of the Multi Metal D-Tox in chelating the ionic heavy metals.